Now taking orders for the 2026 collection
Tribù CTR lounge chair with a rope back on a timber deck beside an infinity pool

Tribù outdoor furniture · Piergiorgio Cazzaniga

Tribù CTR collection

Enquire

Piergiorgio Cazzaniga curved an open rope weave around the back of CTR and left daylight between it and the seat. From a few feet away the back looks like it is not attached to anything.

The collection

CTR in one paragraph

The weave is rope worked around a curved hoop, loose enough to see the garden through. Because it stops short of the seat frame the back appears to hang in the air, and that gap is the whole idea of the chair. Up close you can follow where each run of rope turns at the edge of the hoop.

The legs are thin powder-coated metal, splayed a little at the floor, and they take up almost no visual room. A row of CTR armchairs down a long table leaves the view through the terrace open in a way solid-back dining chairs never do.

Three chairs, three heights. The armchair sits at dining height, the bar chair takes a raised outdoor counter, and the lounge chair drops lower with a deeper seat for the end of the evening. All three carry a loose cushion rather than a fixed pad, so the covers come off to wash.

Rope weave takes more sun than it looks like it should, because the color sits inside the fiber and not on the surface of it. Rinse the weave where salt spray reaches, lift the cushions after heavy rain so the undersides dry, and use a soft brush on the rope. A pressure washer will open the weave up.

Designer
Piergiorgio Cazzaniga
Pieces
3
Materials
Hand-woven rope, Powder-coated metal frame, Quick-dry foam, Solution-dyed acrylic
Best for
Dining terraces, outdoor kitchen counters and covered porches
Pricing
On request

Ask about CTR

Specification

What the CTR pieces are made of

  • Armchair

    Frame
    Slim powder-coated metal legs
    Seat
    Open rope weave around the back, loose seat cushion
    Care
    Soft brush and soapy water on the rope
  • Bar chair

    Frame
    Powder-coated metal with a footrest
    Seat
    Rope-woven back and a loose seat cushion
    Care
    Rinse salt off the frame and the footrest
  • Lounge chair

    Frame
    Powder-coated metal, lower and deeper
    Seat
    Rope weave with a deeper seat cushion
    Care
    Lift the cushion after rain so the underside dries
  • Seat cushions

    Frame
    Loose on the seat frame
    Seat
    Quick-dry foam under solution-dyed acrylic
    Care
    Covers come off and wash at 30 °C
Finishes and fabrics are chosen per order. Samples ship before anything is built.

Build

How a CTR piece is layered

  1. Solution-dyed acrylic cover

    Color is fixed in the fiber before it is spun, so a season of sun takes it down evenly rather than in patches.

  2. Quick-dry foam

    Open-cell core. Water drains out through the base of the cushion instead of pooling in the middle.

  3. Hand-woven rope

    Worked open around a curved hoop. It shapes the back, drains in minutes and leaves the view through the chair.

  4. Powder-coated frame

    Thin metal legs and the hoop the rope is worked onto. The coat is the weather layer, so keep salt rinsed off.

Cross-section of a CTR seat, outside face at the top.

Pieces

3 pieces in CTR

  • Bar Chair from the Tribù CTR collection Bar Chair
  • Armchair from the Tribù CTR collection Armchair
  • Lounge Chair from the Tribù CTR collection Lounge Chair

Every piece is priced on request. Tell us which ones matter and the quote comes back with lead times.

Correspondence

Write to us about your terrace

Tribù does not publish prices. Describe the space and the evenings you plan to spend on it, and a reply with collections and pricing comes back by email.

A Tribù specialist replies within one business day with lead times, finishes and trade pricing.

Dear Tribù,

Yours,

A Tribù specialist replies within one business day with lead times, finishes and trade pricing.

Your details go to the Tribù sales desk and nowhere else.